The difference about the heat transfer film and wood paper veneer: wood paper is a kind of skin decorative paper, the raw material is wood pulp kraft paper, high strength. The utility model is mainly used for the decoration or trimming of the household articles such as furniture, speakers, etc.. Other uses include: plastic packaging, plastic packaging, cigarette and liquor calendars, decorative painting etc.. Its pattern is printed out of the tree, the thickness of the general 0.5~1.0mm, the surface smooth and shiny.

The difference between the 1, wood paper and wood grain paper is a kind of skin decorative paper, veneer is a semi natural decorative material.

2, wood paper on the pattern printed out; veneer patterns on the quality of wood itself with the pattern.

3, wood paper thickness generally in 0.5~1.0mm; the thickness of veneer is generally 1.0mm~2.0mm.

4, wood paper in accordance with the different materials can be used for surface decoration, furniture or trimming; veneer surface layer is mainly used in high-grade decoration.

5, wood paper general price is low; most expensive veneer.

6, a lot of wood paper domestic products; most major veneer precious species can only rely on imported products.

Thermal transfer film printing method:

1 image without turning

2 color laser printer to print all the available settings, thick paper printing paper.

3 if you need to use waterproof paint color inkjet printer ink printing in color ink-jet printing thermal transfer film, print settings: 300 pixels per inch, high quality images, high quality glossy paper.

Operation method:

1.A, image printing is completed, the use of light oil (automatic spray painting) evenly sprayed on the pattern, every 5 minutes to spray a general 2-3 after spraying for about 30 minutes, so that the oil completely dry.

In the picture above 2 color ink-jet printing good positioning oil positioning, positioning method: A. Brush: brush with oil evenly coated on the positioning pattern; B. Screen: 150 to screen positioning in mimeograph motifs, natural drying time is 5 to 10 minutes.

3 in the light oil deal with a pattern of water transfer (remember to light oil after drying part patterned cut paper) immersed in warm water for 30 seconds or so, (water temperature 20-30 degrees, that is by hand to test the water temperature is on the line) to the pattern layer and the backing paper automatically separate or use a separate hand twist twist.

4 of the water removed from the whole song paper is put on the printing surface, then use the left thumb to hold the pattern layer, with the right hand pull out of the bottom, bottom paper gently.

5 cotton, soft cloth or absorbent paper dry water, flat pattern, do not appear bubble.

6 wait for natural dry or with a hair dryer drying, completely dry, use light oil again surface protection treatment or the use of oven and bake for 5 minutes, the temperature is set to 150 degrees.

7 water transfer printing objects with cover oil on the water transfer pattern cover. Dipping, spraying, printing and other methods can be.